Perform as many as 42 elutions in one rack, saving valuable bench space. Eliminate the time and space consuming set-up of multiple support rods and stands with this rack that simultaneously supports both elution columns and collection tubes.

The height of the rack can be quickly adjusted to accommodate various length elution columns. Conversion kits are available to adapt any of these racks to fit a variety of tube sizes (13mm, 16mm, 25mm and 30mm). Steam autoclavable at 121ºC (250ºF).

Easy Open, Dispose Used Tips and Tubes Bright red, autoclavable bags feature one long flap for easy opening. Their size allows the bag to be inverted over your hand to safely pick up waste. For a space-saving disposal unit in fume hoods or on bench tops, use them with Poxygrid® Desk Model Bag Holder H13193-1000. Printed with the biohazard symbol and sterilization indicator patch, they are made of High Molecular Weight, High-Density (HMHD) polyethylene and pass ASTM 1922 Tear Resistance and ASTM 1709 Dart Impact Tests. Steam autoclavable at 121°C (250°F). Per box, 100 or 1000.

Poxygrid® Handy Disposal Holder for Labs and Medical Offices Economical and convenient, this rectangular frame holds a polyethylene bag 22 x 28cm (81/2 x 11") which is just the right size for collecting pipette tips, microcentrifuge tubes, etc. during daily use. The steel wire holder is coated in durable biohazard orange epoxy and measures 8.5 x 12.7 x 21.6cm H (33/8 x 5 x 81/2"). Use with Bench Top Biohazard Bags H13182-0812, page 7, and F13166-0000 shown above.

Easily Transport 8 or 16oz. Bottles Safely and conveniently transport up to 6 wash bottles in this sturdy, lightweight polypropylene carrier. Its secure handle affords both comfort and control. Autoclavable at 121ºC (250ºF) and chemical resistant. Holds 250ml (8oz) or 500ml (16oz) bottles. 28.6 x 19.4 x 22.5cm high (111/4 x 75/8 x 87/8").

This bottle carrier is made of 1/4" thick high-density polyethylene. It is 36 x 18 x 15cm H (14 x 7 x 6"H), with a 25.4mm (1") diameter handle. Divider sold separately. Each compartment measures 8.5 x 8.5cm (33/8 x 33/8").

Easily Remove Tube or Carry in Holder Patent Pending The most versatile tube holder on the market. Setup takes just seconds and gives you the choice of creating a 15ml or a 50ml tube holder. Unlike other tube holders, the open uprights allow you to view the entire contents of the tube. No more guessing if liquid remains in the conical bottom. Tube can be easily lifted from the holder, or pinch the uprights and carry the holder with the tube. 4 per bag.

Compatible with a Wide Range of Gases or Liquids for Laboratory or Plant Applications Used for flow measurements in the lab, process flows in pilot plants, metering carrier gases in chromato graphy, indicating and controlling gases in manufacturing processes and for indicating flow rates in pumping or flow systems. Formed from heavy-walled, shock-resistant borosilicate glass, these flowmeters can be used at operating pressures up to 200 p.s.i.g. and maximum temperatures of 121ºC (250ºF). They feature fused ceramic scales that are accurate to within ±2% of full scale. 
Repeatability is 0.25%. Uniformly tapered bores have internal rib guides to stabilize the glass, stainless steel or carboloy floats. Flow measurement is taken by reading the center of the float on the universal scale. The number on the scale corresponds to a flow rate for the given fluid or gas on a calibration chart that is supplied. Flowmeters are available in four styles. 65mm scale, sizes 1-6 and 150mm scale sizes 1-5.

Safely vent noxious or potentially hazardous fumes and dust using Scienceware® Clear View Fume Hoods. Constructed of clear polycarbonate, they have a sleek modern style that is functional and aesthetically pleasing while offering an unobstructed view into the hood from all sides.

Two standard sizes are offered, each with a sliding sash that can be completely lowered or set at a choice of two intermediary heights. Top sitting 6” O.D. vent opening(s) allow easy connection to exhaust systems. Perfect for laboratory, classroom or industrial applications.

Filter Large Volumes Quickly

Polyethylene funnels with your choice ofFritware® or Perforated filter plate. Removable hose barbed connector accepts 12.7mm (1⁄2") I.D. tube and threads into 3⁄4" NPT bung on the funnel.

Fritware® Porous Filter Plates

FIXED or REMOVABLE porous filter plate supported by a multiple ring grid. Filter plates are made of high density polyethylene, 6.4mm (1⁄4") thick, with a non-porous ring at the periphery of the plate which seals filter paper when used. Available in two porosities (medium and coarse). Medium porosity plate
is 45-90 microns; coarse porosity plate is 90-130
microns. Use below 52ºC (125ºF).

Perforated Filter Plates

Available with a FIXED or REMOVABLE perforated filter plate made of 4.8mm (3⁄16") thick high density polyethylene (HDPE) with 4.8mm (3⁄16") perforations on 11mm (7⁄16") centers. The FIXED version is for coarse filtration or use with a cloth or paper filter. A REMOVABLE filter plate is available for use in precious metals recovery. Use below 52ºC (125ºF) Large diameter 24" and 36" sizes (next page) are crated for shipment

Use for Colorimetric and Turbidimetric Determinations Including Color Concentration ,Haze and Density Measurements , Microbiology Growth Curves.

Klett™ Colorimeters Offer:-

Rugged construction for long service life
Klett™ scale is longer than many other photoelectric scales allowing greater graduation spacing for easier and more accurate readings
Repeatable results with accuracy to 0.33% on the full scale
Accessory filters allow measurement over complete visual range
Measurements for both color and turbidity are possible
Fully compensated and balanced electrical circuits do not require storage batteries or current regulators
Available as 115 or 220V for use worldwide

This lightweight pipettor has a fast release trigger that dispenses
the entire pipette contents. An optimally located thumb wheeleasily rotates for precision aspirating or dispensing, down to avolume of one drop at a time – all while using a relaxed grip.

The thumb wheel also can be used to “blow out” the contents of the pipette. Available in three different pipette volumes, 2, 10 and 25ml, each color-coded for easy identification. A self-stabilizing collar inside the silicone chuck holds either glass or plasticpipettes. Resistant to acids, alkalis and most solvents, they can be disassembled for cleaning.
Overall length: 17.1cm (63⁄4").

Reference

A 9.5mm (3/8") diameter polyethylene pick-up rod with powerful Alnico magnet sealed in one end and handy hang-up loop on other. Will easily retrieve stirring bars to a maximum length of 1". 36 per case.

Dishwasher-safe and autoclave-safe,the reusable Disposal Carton Coveropens quickly and easily by pressingthe built-in release tab – no batteries required! The cover fits any disposal .carton that has a 30.5 x 30.5cm (12 x 12") opening including F13205-0001 Biohazard Incinerator Floor Standing Carton (above) and features a smooth 10.1 x 10.1cm (4 x 4") area on top for applying labels. The center panel is red to match the printing on the Biohazard disposalcartons providing fast visual recognition of the waste stream. Compared to the disposable .cardboard lids supplied with the cartons, the Disposal Carton Cover provides a wider opening 20.3 x 24.1cm (8 x 91⁄2") permitting safer and more sanitary deposit of wastes into the container. Store the disposable cardboard lid on the bottom of the carton and when carton is full, simply remove the reusable Disposal Carton Cover, replace with the cardboard lid, and dispose of the carton in the usual fashion. Wash the Disposal Carton Cover as needed, and it’s ready for re-use. Autoclavable at 121°C (250°F). www.belart.com 1.800.4BELART SAFETY 331

Hot Hand® Mitts provide superior protection when handling hot or cold objects,including dry ice. Made of strong silicone rubber which resists tearing, itwithstands temperatures as high as 260°C (500°F) and remains flexible at temperatures as low as -57°C (-70°F). Thumb and fingers fit into each pocket. The gripping surfaces have concave tipped studs for a non-slip grip,
10 x 19cm (37⁄8 x 71⁄2"). Per each, 24 per case.

Highest Impact Resistance of All Transparent Shield Materials Laboratory workers are protected by a 4.7mm (3⁄16") thick clear polycarbonate barrier. Stable three-sided construction provides front and side protection against flying debris. The heavy steel perimeter base is coated with blue epoxy. Plated steel bolts, nuts and washers are used for assembly. Outside base width is 50cm (191⁄2˝) and17cm (61⁄2˝) front to back